Release version: 6.18.3
Release date: 14th April 2023
Introduction
This page describes the enhancements in Lasernet FO Connector 6.18.3.
Click to view the Release Notes page.
Models
Lasernet FO Connector 6.18.3 contains the following models, including the model for integration with Dynamics 365 Customer Engagement and the models for Lasernet print buttons.
Model | Description | Location/Remark |
---|---|---|
Lasernet | Core and main engine for Lasernet FO Connector | Lasernet
|
Lasernet81Spec | Additional requirements in relation to 8.1 and newer versions of standard Dynamics 365 Finance and Operations | |
PRNButtons | Lasernet print buttons | Print buttons |
PRNButtonsLACAdaptor | Adaptor between the Lasernet print buttons and Lasernet | |
LACCE | Provide the integration to CE from Lasernet FO Connector | Lasernet > Dataverse/Dynamics365 |
LACMSHotfixes | Hotfixes for standard Dynamics 365 Finance and Operations | System Administration > Setup > Hotfixes from Lasernet |
Lasernet Test Suite | Test & Performance Suite | Lasernet > Test and performance suite Requires activation Key Lasernet > Test & performance suite > Parameters |
LasernetPU35Spec | Support of Wave labels in Dynamics 365 Finance and Operations | |
Lasernet Autoform DM | Integration to the Autoform (Archive) |
Objects
Please ensure the following new objects/dll-files are added to TFS if you are not just installing/deploying the AOT-package.
LACSupport.dll.config
XmlDiffPatch.dll
XmlDiffPath.View.dll
This is the complete list of objects which are not automatically added:
Version
The version number should be 6.18.3.x as shown, after either installing or deploying the AOT-package.
Lasernet > Setup > Parameters
Platform Update (PU) | Version number |
---|---|
PU55 | 6.18.3.2304124 |
PU56 | 6.18.3.2304123 |
PU57 | 6.18.3.2304125 |
Adding the AOT-package
Add the AOT-package using one of the following methods:
Through LCS
Apply a deployable package to an environment
Install a deployable package
This requires RDP access to environment
Lasernet FO Connector 6.18.x is supported with Lasernet 9 and Lasernet 10. A setup for either Lasernet 9 or Lasernet 10 is required for any new installation and when upgrading from Lasernet 8.
Pre-requisite / Technical
It is best practice to do a Stylesheet refresh after upgrading Lasernet FO Connector because this could help avoid potential issue(s).
We recommend that you use the following Register selection-classes located in Lasernet > Setup > Backup parameters > Setup Default Selections in case an error like the one shown in the example is thrown when using Export, Import or Copy across companies (legal entities).
The newly introduced upgrade framework in Lasernet FO Connector 6.18 should manage but could ’fail’ in a scenario when using a TFS/Dev build as this would require executing Microsoft.Dynamics.AX.Deployment.Setup.exe.
Please try to run ’Register selection-classes’ before processing
or
Cannot create a record in Lasernet default export/import selection (LACDefaultSelection). The record already exists.
What’s New
347572@LAC365FO
"Buffer for call of SrsTmpTblMarshaller::deleteTmpTblData is not specified" when printing Cheque Replacement Report
Using a replacement (Query) for the French cheque (Report: Cheque_FR) threw the following Error message:
Buffer for call of SrsTmpTblMarshaller::deleteTmpTblData is not specified. at Dynamics.AX.Application.LACUtils.`Global_StackInfo(XppPrePostArgs _args) in xppSource://Source/Lasernet\AxClass_LACUtils.xpp:line 1299 at
We recommend that you consider the following when working with cheques in Dynamics 365:
Resend with force-rerun from the Lasernet Archive is not supported for the cheque reports. This is due to the Microsoft logic of not being able to regenerate the same cheque again – for obvious reasons.
Having a large amount in the Debit/Credit (13 or more characters) field would, when using replacement, show the following warnings: ‘The field value is too long Amount’ and ‘The field value is too long Amount in text’.
The same behaviour applies when using standard SSRS/Report but the warning is not shown – because it would be shown at the Reporting server and therefore is not expected to show in Dynamics D365FO.
347571@LAC365FO
"Object Reference not set to an instance of an object." When printing to predefined destinations on all SSRS reports on Lasernet FO Connector 6.18.2 and PU 10.0.31.
Using SSRS as the origin for Lasernet reports (a legacy way of working with Lasernet) threw the following error when using predefined destinations:
Error Object reference not set to an instance of an object.
The SSRS report with Lasernet was still generated and delivered. Even though the error message was thrown.
There are no issues when using replacement reports.
347570@LAC365FO
A blank screen was shown if Preview in new browser tab was enabled.
In some cases, Resend (preview) of a document showed an empty screen in the Form from which the Preview was initiated (started).
This was only an issue when having the Preview in new browser tab option enabled Lasernet > Setup > Lists > File formats.
An empty screen with no entries (records) would be shown in the Form – see the following example.
Re-showing/re-sending the document from Lasernet > Common > Archive.
In some situations, an empty screen was shown.
Result in Lasernet Archive | Expected result in Lasernet Archive |
A similar issue occurred when posting and previewing a document such as Sales invoice, Sales confirmation and when Preview in new separate browser tab was enabled.
The Preview in new browser tab option was also used when reviewing a document in previous versions of Lasernet FO Connector.
Lasernet FO Connector 6.18.3 does not use the setting for the Preview in new browser tab but does always show the document within the same browser session/tab.
Enabling ‘Preview in new browser tab’ for a specific file type/format is located in Lasernet > Setup > Lists > File formats.
346681@LAC365FO
Using SharePoint on PU56 (10.0.32) or newer failed
Using Lasernet FO Connector 6.18.2 or earlier with Dynamics 365 Finance and Operation 10.0.32 (PU56) or later threw the error when using SharePoint for Lasernet.
Lasernet > Setup > Administration > Connections
The error was thrown when entering information in relation to SharePoint (like Subsite, Folder), validating connection/server or when processing a Report to SharePoint through Lasernet.
Method not found: 'Void Microsoft.Dynamics.Platform.Integration.SharePoint.RestProxyBase.AddAuthentication(System.Net.HttpWebRequest)'.
{"error_description":"ID3035: The request was not valid or is malformed."}
Lasernet FO Connector 6.18.3 is compliant with SharePoint in both earlier and later versions of Dynamics 365 Finance and Operations.
Add a comment
Please log in or register to submit a comment.