Let us now consider how to align a text inside fixed size box by using the Text vertical and horizontal alignment settings.

Text horizontal alignment

The setting implies a horizontal alignment of a text within the text box.

Text vertical alignment

The setting implies a vertical alignment of a text within the text box.

Exercise

Download and import the attached configuration called 06. Rearrange Properties (Text Alignment) in Lasernet Developer 9. Afterwards, go to the Forms section, and then open the Sample form.

1. Add a new Rearrange which is similar to the one you can see on the picture below:

Specify the following settings for the Rearrange you have just added.

2. Set Size type to Auto Y.

3. Set the X position to 30, Y to 40, and Width to 55.

4. For Box horizontal Alignment, make sure the Left check box is selected. It is selected by default.

5. For Box vertical alignment, make sure the Top check box is selected. It is selected by default.

6. For Overflow, select the Force line break radio button.

7. Make sure that now you have a text available in a left-top aligned box.

8. Copy and paste the Rearrange. For a Rearrange copy, specify the following position settings: X to 150 and Y to 40.

9. Edit the Rearrange properties and set Box horizontal alignment to Right.

10. Edit the Rearrange properties and set Tex horizontal alignment to Right.

Note: The box text alignment can also be set via the Property bar.

11. Select Rearranges. To this end, use the Select tool. Make sure, it is selected on the Developer toolbar. Afterwards, hold down CTRL and click each Rearrange. Right-click a selection, and then click Copy. Move a cursor to the following position: X = 30 mm and Y = 130 mm. Right-click at the cursor position, and then click Paste.

12. Select the Rearrange located in the bottom left-hand corner and set Text horizontal alignment to Center.

13. Select the Rearrange located in the bottom right-hand corner and set Text horizontal alignment to Justified.

4 Rearrange text blocks are now aligned in the text boxes as illustrated on the picture below:

14. Select the Rearrange located in the bottom left-hand corner.

15. Edit the Rearrange settings and set Size type to Manual.

16. Set the X position to 30, Y to 103, Width to 55 and Height to 30.

17. When Size type is set to Manual, the Text vertical alignment setting is enabled. Set the Text vertical alignment setting to Bottom.

18. Select the Rearrange located in the bottom right-hand corner.

19. Edit the Rearrange settings and set Size type to Manual.

20. Set the X position to 150, Y to 103, Width to 55 and Height to 60.

21. Set the Text vertical alignment setting to Middle.

4 Rearrange text blocks are now aligned in the text boxes as illustrated on the picture below: